All problems

Problem 2 · MMD January 2022

Overhanging 16 m beam

A uniform beam AB, 16 m long weighing 112 kg, is supported at a point 2 m from end A and at a point 4 m from end B. It carries a point load of 13 kg at its mid-length. Draw SF and BM diagrams of the beam and state their values at a point 2.55 m from end B.

  • Kilogrammes treated as kgf, as written in the paper. Multiply by g = 9.81 for newtons.
  • Supports sit inboard — free overhangs at both ends, so BM is not zero at the knife edges.

Loading diagram

× 9.81 N/kgf if SI is required.

16 m7 kg/m13 kgABR1 50 kgfR2 75 kgf

R1

50 kgf

2 m from A

R2

75 kgf

12 m from A

Max sagging BM

78.571 kg·m

at 7.133 m

Max hogging BM

-56 kg·m

at 12 m

Asked in the paper

SF and BM diagrams

x8 m|SF -19|BM 76
Shear force · kgf-50050ABBending moment · kg·m-100-50050100AB

Drag across the plots to read values. Sagging BM is drawn positive.

  1. Step 1

    Loads

    Self-weight w = 112/16 = 7 kg/m, acting as a UDL over 16 m. Point load 13 kg at 8 m from A. Supports C at 2 m and D at 12 m (4 m from B).

  2. Step 2

    Reactions

    ΣV = 125 kg. Moments about C: 112×6 + 13×6 = 750 = RD×10, so RD = 75 kg and RC = 50 kg.

  3. Step 3

    Asked section

    2.55 m from B is 13.45 m from A, on the right-hand overhang. SF = 17.85 kg (sagging-side positive left-up). BM = −22.76 kg·m (hogging from the overhang).